Submerged slurry pumps are mostly used in oil drilling mud solids control systems. They can pump thick liquid, heavy oil, oil residue, turbid liquid, mud, and fluids containing mud sand residue and corrosive liquids. The submerged slurry pump has significant advantages such as high efficiency, maintenance-free, high temperature resistance and long service life.
The submerged slurry pump is a vertical single-stage single-suction cantilever centrifugal pump structure. The impeller is a semi-open impeller, and a stirring impeller is provided at the extension of the suction side of the impeller. The vertical motor is installed on the motor base and connected to the pump with a coupling. The pump shaft in the submerged part has sufficient rigidity. There is no bearing between the impeller and the pump body, and no shaft seal is used, which can transport the medium containing a large concentration of solid particles. The length of the pump inserted into the liquid is between 800mm and 2500mm, and a suction pipe can be equipped if necessary. The main feature of the submerged slurry pump is that the pump shaft in the submerged part has sufficient rigidity. There is no bearing between the impeller and the pump casing, and no shaft seal is used. It can transport medium containing a large concentration of solid particles; maintenance-free, High temperature resistance. The length of the pump inserted into the liquid is between 800-1900mm, and a suction pipe can be equipped if necessary. The drive is installed on the motor base by a vertical motor and connected to the pump with a coupling. Viewed from the direction of the motor, the pump rotates clockwise. The flow parts of this series of pumps are made of high-hard alloy castings, and their materials have high abrasion resistance, corrosion resistance, and impact resistance, which increase their service life. In addition, this series of pumps uses dynamic pressure reduction to ensure that the slurry is not easy to leak .

The submersible slurry pump is a single-stage, single-suction cantilever structure. The hydraulic components of the pump are connected by a bearing seat, a supporting seat, and a connecting pipe. The liquid is discharged from the liquid outlet pipe. The impeller of the pump is a semi-open impeller. The inlet extension is equipped with agitating blades. The main feature of the pump is that the pump shaft at the submerged part has sufficient rigidity. There is no bearing between the impeller and the pump casing, and no shaft seal is used. It can transport the fixed particles with a larger concentration. medium. The length of the pump inserted into the liquid is between 800-2000, and a suction pipe can be equipped if necessary. The shaft seal adopts a larger pump to run in the liquid, without shaft seal, the transmission is installed on the motor support and support seat by a vertical motor, and is connected with the pump by a coupling.

   YZ type submerged slurry pump, sp type submerged slurry pump, ZJL type submerged slurry pump is a vertical single-stage single-suction cantilever centrifugal pump structure, the impeller is a semi-open impeller, set at the extension of the impeller suction side There are mixing blades. It is mainly used in environmental protection, municipal engineering, thermal power plants, gas coking plants, oil refineries, steel mills, mining, papermaking, cement plants, food plants, printing and dyeing and other industries to pump concentrated liquid, heavy oil, oil residue, and dirt. Liquid, mud, mortar, quicksand and flowing sludge in urban sewage channels, as well as fluids containing mud, sand and slag and corrosive liquids.